AREXONS abrasive paste for car paint correction, 150 ml

Arexons abrasive paste for removing light scratches and marks

Abrasive paste for removing light scratches, marks and oxidised paint, with a finish that can be refined further using polishing products.

This Arexons abrasive paste is made for paint correction work on cars where you need to deal with light surface damage rather than deep body repairs. It is formulated with selected smoothing and polishing fillers to help remove marks, surface scratches, rubber or paint residue caused by minor bumps.

It is also used for polishing worn or oxidised paint, helping to bring back gloss on dull or matted surfaces. The listing also notes use in body shops for removing imperfections during painting and for polishing fibreglass moulds.

How it is used

The paste can be applied with special polishing pads and an electric polisher. For a fuller polishing process, Arexons recommends following it with Arexons Abrasive Liquid and then Arexons Polish.

What to keep in mind

• Best suited to light marks, shallow scratches and surface blemishes.
• Useful where paint has gone dull, oxidised or slightly marked.
• Not presented as a deep scratch repair product, so check whether the damage is only in the clear coat or surface layer before buying.
• The product is supplied in a 150 ml pack.

Product details from the listing

• White paste
• Density at 20 °C: 1.560 g/cm3
• Grain size: 10 to 50 µm, with max under 100 µm
• Flash point: 40 °C
• Indicative composition: 60% smoothing fillers, 40%