BenBow Classic Compressed Air Cleaning Gun Set with Venturi Blow Nozzle

Compressed-air cleaning and drying tools for vehicle care

A two-piece compressed-air set for cleaning vehicle interiors and trim, drying awkward areas, and blowing away dust and debris.

The BenBow Classic set combines a compressed air cleaning gun with a separate air blow gun fitted with a Venturi nozzle. The cleaning gun uses a rotating rod to create a whirlwind effect and draw cleaning agent from its container, while the blow gun is intended for directing air into corners and other hard-to-reach areas.

For interior cleaning and awkward drying areas

The cleaning gun is described for dirt on tyres, seats, floor mats, headliners, rough plastic trim, air vents and door panels. The Venturi blow gun can help clear or dry areas such as door handles, mirrors and corners, and can also be used for blowing chips from machines or cleaning workshop areas that are difficult to sweep or wipe.

Compressor requirements and set contents

• The cleaning gun has a maximum working pressure of 6.2 bar, a 1/4-inch connection and a stated requirement for a two-cylinder compressor with a 100-litre tank and 300 l/min air output.
• The cleaning gun includes a plastic funnel, stainless steel interior, weighted silicone tube and an empty 1-litre cleaning-agent container. It weighs approximately 900 g and has a stated maximum speed of 7,500 rpm.
• The blow gun has a 1/4-inch connection, an air consumption of 450 l/min, a stated working pressure of 10.3 to 15 bar, and an air output of 1,000 l/min at 15 bar. It weighs 340 g and includes an adapter.
• Check that your compressor, air connections and available pressure meet the listed requirements before buying.