Generic

Drive Tec 5L Brake Cleaner and Degreaser

Name: Drive Tec 5L Brake Cleaner and Degreaser
Brand: Generic

£24.99

In stock

amazon.co.uk price: £24.99 (as of 03/10/2026 10:18 UTC) Details

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.co.uk at the time of purchase will apply to the purchase of this product.

Buy now on Amazon

As an Amazon Associate we earn from qualifying purchases. This does not affect the price you pay.

Product details

MotorStash take

A 5-litre brake cleaner and degreaser for repeat workshop use where controlled transfer and storage are already planned.

Drive Tec Brake Cleaner 5L is listed for dissolving grease, oil and grime. The bulk pack makes most sense for regular maintenance or workshop cleaning, but it is not as simple as picking up an aerosol: you need suitable dispensing equipment, clear labelling and the current product label or safety data sheet before use.

Best fit

Choose 5 litres when usage is frequent enough to justify a bulk container.

A larger pack can reduce the number of small cans used during repeated brake and parts-cleaning jobs. It also lets you choose a controlled applicator that is compatible with the liquid—if the manufacturer guidance permits transfer.

For an occasional home job, a ready-to-use aerosol may be more convenient. The useful comparison is not only price per litre; it is also how safely and accurately you can dispense, identify and store the product.

Drive Tec 5L brake cleaner and degreaser container

5-litre pack

Better aligned with repeat use than a single small can, provided the container can be stored safely and used before it deteriorates.

Brake-cleaning focus

Listed to remove grease, oil and grime during cleaning work; it is not a lubricant, repair fluid or substitute for component inspection.

Transfer required

Plan a compatible, clearly labelled applicator rather than pouring into an unmarked household bottle.

Controlled application

Aim only at the part being cleaned and collect contaminated runoff according to the product and local disposal guidance.

Surface checks

Compatibility with paint, plastics, rubber and coated parts is not established by the product title. Check before contact.

Workshop responsibility

The current label and SDS should decide ventilation, PPE, ignition control, storage and disposal—not assumptions based on another cleaner.

What the 5-litre format changes

Frequency

Bulk buying is most practical when brake or parts cleaning is regular enough to avoid long, poorly controlled storage.

Applicator compatibility

Not every sprayer, seal or hose tolerates every solvent. Use only equipment approved for the product.

Labelling

Any permitted transfer container should remain clearly identified with relevant hazard and use information.

Contamination control

Do not return used liquid to the original container or mix it with another cleaner.

Storage

Keep the original container closed and follow the stated temperature, ventilation and ignition-source restrictions.

Disposal

Used cleaner can contain oil, brake dust and other residues. Follow the label, SDS and local waste rules.

Drive Tec 5-litre brake cleaner packaging and product information

Do not decant blindly: first confirm that transfer is allowed and that the sprayer, seals and labelling are suitable for the actual formulation.

Keep roles separate: brake cleaner removes contamination. Fresh lubricant, where specified, is applied only after cleaning and only to approved non-friction contact points.

Bulk or aerosol?

Choose the format around your real workflow

Format	Best fit	Trade-off
5L bulk liquid	Frequent use with approved dispensing and safe storage	Transfer equipment, labelling and spill control are your responsibility
Ready-to-use aerosol	Occasional jobs and targeted spray convenience	More packaging and often a higher unit cost for repeat use
General-purpose degreaser	Only surfaces explicitly covered by that cleaner	Do not assume it is appropriate for brake assemblies

A controlled brake-cleaning routine

Read the label and SDS
Confirm PPE, ventilation, fire precautions, compatible surfaces and disposal requirements before opening the container.
Inspect and contain
Work on supported, cool components and prepare to capture contaminated liquid rather than spreading it across the floor.
Apply only where suitable
Use a compatible applicator, avoid unnecessary overspray and protect sensitive adjacent finishes.
Let parts dry as directed
Do not reassemble or apply approved fresh lubricant until the cleaning step is complete.
Check the component
Cleaning does not correct wear, leaks, cracks, seized movement or contamination that has damaged friction material.

Worth considering if

5 litresRepeat useWorkshop setup

You regularly clean suitable brake or mechanical parts and already have a safe plan for dispensing, ventilation and storage.

Look elsewhere if

One-off jobNo compatible sprayerUnknown surface

You only need a small ready-to-use cleaner or cannot confirm the formulation's handling and surface requirements.

Bottom line: Drive Tec 5L is a bulk cleaning format for buyers who can use and store it responsibly. Judge it on verified label/SDS information and your dispensing process, not only on the lower-friction promise of a large container.