Safecope Cerium Oxide Glass Polishing Powder, 10 oz (284g)

Safecope cerium oxide glass polishing powder for glass and mirrors

Fine cerium oxide powder for cleaning and polishing glass surfaces, including removing oil film, water spots, wiper streaks and light scratches.

This 10 oz (284g) cerium oxide powder is made for glass surface cleaning and polishing, with the listing describing it as a 99.97% high-purity, ultra-fine abrasive. It is intended for use on glass and mirrors, including car windshields, side windows and headlights, where the aim is to remove contamination and improve clarity.

What it is used for

• Mixes with water to form a polishing solution for glass cleaning and correction work.
• Helps remove oil films, water spots, wiper streaks and other surface residue.
• Can be used with a polishing machine and foam pad for light scratches.
• Can also be used by hand with a microfiber cloth or polishing pad for deep cleaning.

How the listing says to use it

• Mix 20% to 50% powder with water to create a uniform solution.
• Shake well before use.
• Apply a generous amount to the glass and work it for at least 5 minutes.
• Keep the area wet during machine use to help avoid heat build-up.
• Rinse off residue with water or alcohol after polishing.

Important limits

• For glass and mirrors only.
• Do not use on resin eyeglass lenses, plastics or acrylics.

For shoppers dealing with cloudy glass, stubborn marks or light surface blemishes, this is a specialist polishing powder rather than an all-purpose cleaner. The result depends on the condition of the glass and the care taken during use.