SPTA Yellow T80 Foam Polishing Pads, 3 Pack, 5.5 inch

SPTA 3 pack 5.5 inch yellow T80 foam polishing pads

Three 5.5 inch T80 foam pads for compounding, polishing and waxing on compatible car polishing machines.

These SPTA foam polishing pads are aimed at paint correction work where you need a bit more bite than a finishing pad. The yellow T80 foam is described as a high-cut pad, with the listing stating it can help remove sanding marks, swirl marks and heavier oxidation when used with suitable compound.

Built for machine polishing work

The pads are listed as suitable for RO, DA and GA car polishers. They use a Velcro backing for quick pad changes on a 125mm backing plate, and the 5.5 inch sponge size gives you a practical working area for general vehicle polishing tasks.

Pad design and handling

The foam has grooves intended to hold excess polish and abrasives while helping airflow across the pad. The listing also describes the sponge as high-density polyurethane with uniform pores, good ventilation and a flexible feel, which should make it easier to work around body panels and curved surfaces.

What to keep in mind

• Use a suitable compound for the level of correction you need.
• Clean the pad during use if polish residue builds up.
• After use, clean it without solvents or alkaline cleaners.
• Check your backing plate size and polisher type before ordering.

The pack contains three yellow T80 foam polishing pads, so it suits routine detailing work where you want spare pads ready for compounding, polishing or waxing tasks.