Wynn's Commercial Vehicle Oil System Flush 1L

Wynn's commercial vehicle oil system flush for pre-change cleaning

An oil system flush for cleaning sludge and deposits before an oil change, with compatibility stated for synthetic and mineral oils.

This 1L oil system flush is designed to clean the engine oil circuit before an oil change. The listing says it helps remove sludge, varnish and carbon deposits from the oil circulation system, so fresh oil goes in without being affected by leftover contamination.

It is described as suitable for all engine types and safe for turbocharged engines. The product information also states that it is compatible with synthetic and mineral oils, including conventional blends and low SAPS oils.

What it is used for

• Cleans the oil system before draining the old oil
• Targets sludge, varnish and carbon deposits
• Helps keep contaminants suspended until the oil is drained
• Intended for use across a wide range of engine types

Points to check before buying

• Follow the label instructions for use and timing
• Make sure the product suits your vehicle’s engine and oil service routine
• Check the oil type and service requirements in your handbook if you are unsure

For drivers and workshops looking to give the oil system a cleaner start before refilling, this is the sort of product used as part of routine maintenance rather than as a cure for a mechanical fault.