Complete material sets
Useful when you need a coordinated selection of compounds, pads or accessories rather than one standalone liquid.
Polish, Scratch Removers & Waxes
POLYWATCH Plastic Polish for Acrylic Plastics 5g Tube
£5.51
In stock
PolyXpert Acrylic Glass Polishing and Repair Paste, 75 ml Tube
£18.00
In stock
Save 15% 
Protmex 6in Cordless Car Buffer Polisher Kit, Blue
£50.99
Protmex Cordless 6in Car Buffer Polisher Kit, Red
£36.84
Protmex Cordless Car Buffer Polisher Kit, 6-inch, 6-Speed, 2 x 21V 2.0Ah Batteries
£53.99
Quixx Xerapol acrylic scratch remover kit, 50g polish with cloth and sandpaper
£9.93
RAYBAO 1200W Rotary Car Polisher with 6/7 Inch Pads
£56.97
RichVibe 5-Piece 125mm Flat Sponge Buffing Pads Kit
£6.38
In stock
Ruileyou Car Paint Scratch Repair Spray 100ml
£9.99
In stock
Ruileyou Car Paint Scratch Repair Spray Kit, 2 x 100ml + 1 x 30ml
£19.99
In stock
Ruileyou Car Paint Scratch Repair Spray Kit, 3pc 100ml + 1pc 50ml + 1pc 30ml
£29.99
In stock
Safecope Cerium Oxide Glass Polishing Powder, 10 oz (284g)
£8.00
In stock
Schultz Laboratories White Diamond Metal Polish, 12 oz
£22.00
In stock
Save 22% 
Simoniz Liquid Diamond Polish & Wax 475ml, Pack of 1
£4.66
SIQUK 9 Piece 7 Inch Polishing Pads Kit for Drill
£23.22
In stock
SIQUK 9-Piece 6 Inch Polishing Pads Kit for Drill
£9.99
In stock
sodeber 100-piece wool felt polishing buffing pads, 13 mm with 2 shanks
£4.89
In stock
SONAX Polish + Wax Color Blue 500 ml
£20.95
In stock
SONAX Polish + Wax Colour Grey 500 ml
£20.95
In stock
SONAX Polish + Wax Colour White, 500 ml
£12.48
In stock
SONAX Polish+Wax Colour Black 500 ml
£20.95
In stock
SONAX Polish+Wax Colour Red 500 ml
£17.95
In stock
SONAX PROFILINE Cut+Finish One-step Polish, 1 L
£52.49
In stock
SONAX PROFILINE Cut+Finish One-step Polish, 250 ml
£24.10
In stock
Paint correction and protection
Choose car polish, scratch remover and wax for the job your paint actually needs
Not every mark needs an aggressive compound, and wax will not remove a scratch. Start by identifying the defect, then choose the least aggressive correction step that can improve it. Finish with protection only after the surface is clean and the result has been checked in good light.
Start with the task
Which product family should you look at?
Compounds and correction liquids
For oxidation, sanding marks or visible defects that need controlled abrasive correction before refining.
Polishes and finishing products
For restoring gloss, refining light haze or preparing paint for a separate wax or sealant.
Machines and accessories
For repeatable machine work where pad size, backing plate, orbit and speed control must match the task.
Understand the labels
Six common product types and what they are designed to do
Compound
A comparatively abrasive correction product for heavier oxidation, sanding marks or more visible clear-coat defects. It normally needs a refining step afterwards.
Scratch remover
A targeted abrasive or filling product for localised light marks. It can improve appearance, but it cannot rebuild missing paint or safely remove every deep scratch.
Polish
A finishing or light-correction product used to improve clarity and gloss. Some polishes contain protection, while others are intended to be followed by wax or sealant.
Wax or sealant
A protective finishing layer that can add gloss and water behaviour. It protects the prepared surface; it does not remove defects underneath it.
Pads and applicators
The pad changes the result as much as the liquid. Cutting, polishing and finishing pads should be matched to the product, paint condition and application method.
Polishing machines
Dual-action and rotary machines behave differently. Check pad compatibility, working speed and your experience level before choosing a machine-led process.
Before you buy
Check the paint, the scratch and the working method
Scratch depth: if a fingernail catches strongly or primer/metal is visible, polishing may not be the right repair.
Paint type: original, resprayed, matte and textured finishes can need different products and methods.
Correction level: choose the least aggressive combination that can achieve a useful improvement.
Hand or machine: confirm the product and pad are intended for the method you plan to use.
Panel condition: work only on clean, cool paint and follow the product's stated temperature and curing guidance.
Protection plan: check whether the product leaves protection or requires a separate wax, sealant or coating.
A visual buying guide
Three decisions that prevent wasted effort
Quick comparison
Match what you see to a sensible starting point
| What you see | Useful starting point | Important limit |
|---|---|---|
| Light haze or very fine wash marks | Finishing polish with a soft polishing or finishing pad | Test a small area; harder paint may need a different combination |
| Moderate swirls, oxidation or visible clear-coat defects | Compound or medium-cut polish followed by a refining step | Paint thickness and previous repairs may limit safe correction |
| Isolated light scratch or paint transfer | Targeted scratch remover or controlled spot correction | A deep scratch through the colour coat needs repair, not repeated polishing |
| Clean paint with acceptable gloss | Wax, sealant or another compatible protective finish | Protection can mask very minor marks temporarily but does not remove them |
Safer working sequence
A practical five-step approach
- Wash and decontaminate: remove dirt and bonded contamination so it cannot be dragged across the paint.
- Inspect in good light: identify the defect, check whether the paint is original and decide whether correction is appropriate.
- Run a small test section: begin with a mild product and pad, then inspect the result before increasing cut.
- Refine and clean: remove residue as directed and use a finishing step if the correction stage leaves haze.
- Protect the result: apply a compatible wax or sealant only after the finish meets your expectations.
Important: Always follow the current product instructions. Avoid hot panels and contaminated pads, and seek professional assessment where paint is thin, damaged, matte, textured or previously repaired.
Build a correction process, not just a basket of products
Start with the defect and the safest suitable method. Then check the product page for intended surfaces, hand or machine use, pad compatibility, pack contents and any required follow-up protection.
Need application tools as well? Compare polishing machines and accessories or browse car detailing kits for broader maintenance tasks.