Complete material sets
Useful when you need a coordinated selection of compounds, pads or accessories rather than one standalone liquid.
Polish, Scratch Removers & Waxes
SPTA 3 Pack Blue T60 Moderate-Cut Foam Polishing Pads, 6.5 inch
£18.99
In stock
SPTA 3 Pack Yellow T80 Foam Polishing Pads, 6.5 inch
£21.21
In stock
SPTA 3-Pack Blue Polishing Pads for 150 mm Backing Plate
£21.66
In stock
SPTA 3-Pack Green T120 Heavy-Cut Foam Polishing Pads, 5.5 inch
£23.53
In stock
SPTA 3-Pack Orange Light Cut Foam Polishing Pads, 5.5 inch
£21.61
In stock
SPTA 3-Piece 5.5-inch Blue T60 Moderate-Cut Foam Polishing Pads
£21.26
In stock
SPTA 3-Piece Green T120 Heavy-Cut Foam Polishing Pads, 6.5 Inch
£20.88
In stock
SPTA 3-Piece Orange Light Cut Foam Polishing Pads, 6.5 inch
£18.99
In stock
SPTA 3-Piece Orange Light-Cut Foam Polishing Pads, 6.5 inch
£18.99
In stock
SPTA 3-Piece T20 Finish Polish Red Polishing Pads, 6.5 inch
£18.99
In stock
SPTA 3-Piece Yellow Medium Cut Polishing Pads, 125mm
£24.32
In stock
SPTA 36-Piece Polishing Pad Set for Drill with M14 Adapter
£29.99
In stock
SPTA 5 inch (125mm) Wool Buffing Polishing Pads, 3 Pack
£19.44
In stock
Save 15% 
SPTA 5-Piece 125mm Foam Polishing Pad Set for DA/RO Polishers
£22.94
SPTA Blue Polishing Pads, 3-Piece 125mm Disc Set
£14.77
In stock
SPTA Heavy Cut Polishing Pads, 3 Pack, 5.5 inch, Green
£24.14
In stock
SPTA Red Ultra-Fine Finishing Pad, 3 Pack, 5.5 inch
£22.51
In stock
SPTA Yellow T80 Foam Polishing Pads, 3 Pack, 5.5 inch
£16.99
In stock
Startbuymore 3 Inch 69-Piece Silicon Carbide Wet and Dry Sandpaper Discs Set
£9.99
In stock
Sumsoctober 3 inch Microfiber Car Polishing Pads, 2 Pack
£4.03
In stock
Sumsoctober 4 inch Microfibre Car Polishing Pads, 2 Pack
£4.62
In stock
Sumsoctober 5 inch Microfiber Car Polishing Pads, 2 Pack
£6.35
In stock
SUUEIOKL 23-piece 3-inch 76 mm polishing sponge and wool pad set
£15.49
In stock
T-Cut Black Colour Fast Scratch Remover and Colour Enhancer 150g, Pack of 2
£14.96
In stock
Paint correction and protection
Choose car polish, scratch remover and wax for the job your paint actually needs
Not every mark needs an aggressive compound, and wax will not remove a scratch. Start by identifying the defect, then choose the least aggressive correction step that can improve it. Finish with protection only after the surface is clean and the result has been checked in good light.
Start with the task
Which product family should you look at?
Compounds and correction liquids
For oxidation, sanding marks or visible defects that need controlled abrasive correction before refining.
Polishes and finishing products
For restoring gloss, refining light haze or preparing paint for a separate wax or sealant.
Machines and accessories
For repeatable machine work where pad size, backing plate, orbit and speed control must match the task.
Understand the labels
Six common product types and what they are designed to do
Compound
A comparatively abrasive correction product for heavier oxidation, sanding marks or more visible clear-coat defects. It normally needs a refining step afterwards.
Scratch remover
A targeted abrasive or filling product for localised light marks. It can improve appearance, but it cannot rebuild missing paint or safely remove every deep scratch.
Polish
A finishing or light-correction product used to improve clarity and gloss. Some polishes contain protection, while others are intended to be followed by wax or sealant.
Wax or sealant
A protective finishing layer that can add gloss and water behaviour. It protects the prepared surface; it does not remove defects underneath it.
Pads and applicators
The pad changes the result as much as the liquid. Cutting, polishing and finishing pads should be matched to the product, paint condition and application method.
Polishing machines
Dual-action and rotary machines behave differently. Check pad compatibility, working speed and your experience level before choosing a machine-led process.
Before you buy
Check the paint, the scratch and the working method
Scratch depth: if a fingernail catches strongly or primer/metal is visible, polishing may not be the right repair.
Paint type: original, resprayed, matte and textured finishes can need different products and methods.
Correction level: choose the least aggressive combination that can achieve a useful improvement.
Hand or machine: confirm the product and pad are intended for the method you plan to use.
Panel condition: work only on clean, cool paint and follow the product's stated temperature and curing guidance.
Protection plan: check whether the product leaves protection or requires a separate wax, sealant or coating.
A visual buying guide
Three decisions that prevent wasted effort
Quick comparison
Match what you see to a sensible starting point
| What you see | Useful starting point | Important limit |
|---|---|---|
| Light haze or very fine wash marks | Finishing polish with a soft polishing or finishing pad | Test a small area; harder paint may need a different combination |
| Moderate swirls, oxidation or visible clear-coat defects | Compound or medium-cut polish followed by a refining step | Paint thickness and previous repairs may limit safe correction |
| Isolated light scratch or paint transfer | Targeted scratch remover or controlled spot correction | A deep scratch through the colour coat needs repair, not repeated polishing |
| Clean paint with acceptable gloss | Wax, sealant or another compatible protective finish | Protection can mask very minor marks temporarily but does not remove them |
Safer working sequence
A practical five-step approach
- Wash and decontaminate: remove dirt and bonded contamination so it cannot be dragged across the paint.
- Inspect in good light: identify the defect, check whether the paint is original and decide whether correction is appropriate.
- Run a small test section: begin with a mild product and pad, then inspect the result before increasing cut.
- Refine and clean: remove residue as directed and use a finishing step if the correction stage leaves haze.
- Protect the result: apply a compatible wax or sealant only after the finish meets your expectations.
Important: Always follow the current product instructions. Avoid hot panels and contaminated pads, and seek professional assessment where paint is thin, damaged, matte, textured or previously repaired.
Build a correction process, not just a basket of products
Start with the defect and the safest suitable method. Then check the product page for intended surfaces, hand or machine use, pad compatibility, pack contents and any required follow-up protection.
Need application tools as well? Compare polishing machines and accessories or browse car detailing kits for broader maintenance tasks.